| Medium Height Tint (15-1/2") for 3"/4" Risers Shown |
|
| The Rifle Replacement Windshield for the Can-Am Spyder has a deep, aerodynamic curve. The Rifle windshield is spaced away from the fairing allowing a controlled, funneled amount of air up the inside of the shield and not at the rider. The venting is also across the full width of the windshield. This superior air management increases the envelope of protection and reduces back pressure. |
|
Vented across the full width of the windshield |
- Two versions: One is compatible with stock risers, the other compatible with 3” and 4” aftermarket risers.
- 3 standard heights: approx. 14", 15-1/2" and 17" (measured vertically above ignition switch). 9", 10-1/2" and 12" taller than OEM windshield respectively. 6", 7-1/2", and 9" over the OEM Ultra Sport version respectively. Custom sizes also available.
- Width: 23” at the widest point, measured straight-line. 7” wider than OEM versions.
- Pre-drilled, includes specially machined spacers and mounting fasteners.
- Made of Lucite L® for excellent clarity, scratch and chemical resistance
|
|
Medium Height Tint (15-1/2") for Stock Risers Shown
|
|
Left: Windshield for 3"/4" Risers — Right: Windshield for Stock Risers
|
|
View mounting instructions
(requires Adobe Acrobat)
 |
|
For a custom size, include height in item message box |
